10 equipment and assemblies
Feeding and Storage
Silos, tanks, extraction and raw material receiving.
View equipment→From equipment to complete plants
Equipment
Equipment families and systems for different stages of the industrial process.
Equipment families
52 equipment and systems
9 equipment and assemblies
Valves and slide gates
Control, routing and shut-off of product flow.
View equipment→
10 equipment and assemblies
Conveyors
Elevators, drag conveyors, belts, screws and tubular conveying.
View equipment→
4 equipment and assemblies
Mills
Milling, feeding and integration of auxiliary equipment.
View equipment→
9 equipment and assemblies
Systems
Reprocessing, dispatch, aspiration and industrial structures.
View equipment→Equipment
VRE
Eccentric rotary valve
Designed for grains and pelleted and extruded products. The compartmented rotor controls material transfer.
View equipment→
VRC
Conventional rotary valve
Uses the same operating principle as the VRE, for powder control and the transfer of various bulk products.
View equipment→
DGM
Multi-outlet rotary distributor
Directs product from one inlet to the selected outlet, connecting silos and equipment according to the production sequence.
View equipment→
VDD
Two-way diverter valve
Switches product flow between two outlets. Used to select the discharge destination in silos, conveyors and equipment.
View equipment→
VDY
Y-type two-way diverter valve
Distributes flow between two outlets in a Y configuration. Connections integrate the valve into the plant's transfer piping.
View equipment→
VDT
Three-way diverter valve
Provides three discharge destinations in a single assembly. Outlet selection directs material according to the production stage.
View equipment→
Single manual slide gate
A manually operated sliding plate opens or blocks product flow during discharge and transfer.
View equipment→
Single pneumatic slide gate
Pneumatic actuation integrated with automation. In addition to the single gate, double and triple options are available as required.
View equipment→
Butterfly valve
Rotating disc to control product flow. Cast aluminum body, stainless steel components and actuation according to the project.
View equipment→
ELC
Bucket elevator
Buckets lift product from the lower inlet to the upper discharge. The boot module is self-cleaning. Height, capacity and connections are defined according to the factory layout.
View equipment→
TCR
TCR Redler chain conveyor
In carbon steel or stainless steel, the chain and drag elements move product along the trough. Length, inlets and discharge points according to the process.
View equipment→
TAL
TAL self-cleaning chain conveyor
In carbon steel or stainless steel, this is an evolution of Redler and Drag systems. Designed to operate at inclines of up to 45°, depending on the application.
View equipment→
Straight belt conveyor
Allows routes with curves, inclines and declines according to the layout. Length, width and transfer points are defined according to the product and application.
View equipment→
Inclined belt conveyor
Connects different line levels on ascending or descending sections, with an incline and belt suited to the product.
View equipment→
Curved belt conveyor
Allows changes in direction, adapting transport to the available space and the connections specified in the layout.
View equipment→
SIQ
Autoclean silo
Square-section silo with a panel body and bottom discharge, integrating storage with process feeding.
View equipment→SIP
Panelock silo
Modular panel system for side-by-side storage cells, according to the required volume and plant arrangement.
View equipment→
SIR
Round silos
Cylindrical body and conical bottom for storage and process feeding, with dimensions and discharge configured for the product.
View equipment→
Tanks
Liquid storage tanks with dimensions and connections defined according to the process. Manufactured in carbon steel or stainless steel, with agitation and coil options depending on the application.
View equipment→
EXV
Vibratory extractor
Installed at the silo outlet to assist material flow through vibration. The assembly is selected according to the product and discharge configuration.
View equipment→
Rotary extractor
Assembly with a screw and scrapers driven by a geared motor to assist the discharge of difficult-flowing products. Sized according to the silo and material.
View equipment→
RTC
Trough screw conveyor
Screw installed in a trough to move product between the inlet and discharge. Length and connections according to the process.
View equipment→
RTT
Tubular screw conveyor
Screw in an enclosed tubular body for transferring bulk materials. Installation and connection points according to the application.
View equipment→
RTM
Microdosing screw conveyor
Transports small quantities of ingredients to the dosing point. Diameter and drive are selected according to the product and integration with weighing.
View equipment→
Cablemax · TCA
Tubular cable conveyor
Cable with drag discs. A cost-effective solution with easy cleaning and low energy consumption.
View equipment→
Chainmax · TCO
Tubular chain conveyor
Chain with drag discs, with greater added value and suitability for long distances. Includes a 10-inch model for higher throughput requirements.
View equipment→PFC
Feed Cleaner screen
Especially suited to receiving flours, meals and premix. Retains impurities and agglomerates larger than the screen opening, preparing the flow for subsequent stages.
View equipment→
PMC
Max Clean screen
Fine screening before extrusion, with screens smaller than 3 mm. Retains particles and agglomerates larger than the screen opening to prepare product for the process.
View equipment→
PGI
Rotary pre-cleaning screen
Removes larger impurities from grains at intake, preparing material for storage and processing. The screen is selected according to the product and desired separation.
View equipment→
Linear vibrating screen
Classifies pelleted or extruded products, separating fines and agglomerates according to the screen used. Integrates into product finishing before storage or dispatch.
View equipment→MPS
Paddle mixer
Paddles move ingredients inside the chamber, promoting a homogeneous mixture. Integrates into animal feed lines and other applications according to the product.
View equipment→
MHE
Ribbon mixer
The helical assembly moves ingredients along the chamber to form a homogeneous mixture. Discharge uses a pneumatic guillotine-type slide gate.
View equipment→MMP
Hammer mill
Hammers reduce particle size. The screen controls product passage and influences particle size and milling capacity.
View equipment→
Feeder with magnetic plate
Feeds the mill and helps retain ferrous materials through a magnetic plate before product enters the milling stage.
View equipment→
Feeder with magnetic plate and density separator
Combines ferrous material retention with density separation, according to the processed material and application requirements.
View equipment→
Complete milling system
Integrated supply with mill, feeder, bag filter, exhaust fan, expansion chamber and accessories, sized according to the project.
View equipment→
Bulk bag unloader
Structure to support and unload bulk bags. Loaded by forklift or electric hoist. Can incorporate pneumatic bag massagers, a vibrator and inspection access.
View equipment→
Bulk bag receiving hopper
Receives raw materials, including protein meals. Can integrate a lump breaker, magnetic plate, conveyor, opening blade and aspiration, with an operating and cleaning platform.
View equipment→
Mobile hopper
Wheeled base for manual bag unloading and integration with line feeding points.
View equipment→
Hopper with dust extraction booth
Booth with bag support and aspiration to help collect dust during loading.
View equipment→
Vertical pressure relief unit
For silos, elevators and transfer points. Helps reduce internal pressure and control dust.
View equipment→
Horizontal pressure relief unit
For conveyors and locations with height restrictions. Configuration according to extraction requirements.
View equipment→
Macrodosing system
Integrates silos, extraction, conveying and weighing of ingredients that make up a larger share of the formulation. Operation follows the production sequence.
View equipment→Microdosing system
Dosing of ingredients used in smaller proportions in the formulation. The system combines storage, feeding and weighing, configured for the products being dosed.
View equipment→Pet food reprocessing
Developed by PROMAX to reprocess off-specification products generated at the start, during and at the end of production, as well as fines in real time, with the possibility of returning them to extrusion.
View equipment→
Bulk dispatch system
Number of silos, weighing capacity and scale travel defined according to the project. The assembly can integrate automation and discharge accessories, such as a telescopic loading spout.
View equipment→
Robotic traveling scale
Travels on rails under the silos to the selected discharge point. Integrates weighing and product routing for loading, according to the dispatch sequence.
View equipment→
Cyclones for fines separation
Separate particles from the air stream in the conveying or aspiration system. Number of cyclones, dimensions and connections are defined according to the product and process conditions.
View equipment→
Pneumatic conveying system
Moves product through pipes using an air stream. Route, bends and inlet and discharge points are defined according to the layout and application.
View equipment→
Weighing scales
Integrate weighing with receiving, dosing or dispatch. Capacity, dimensions and inlet and discharge connections are defined according to the product and process.
View equipment→
Industrial structures and platforms
Structures and platforms for equipment support, operation and integration. Access levels and equipment arrangement defined according to the factory layout.
View equipment→
Walkways and guardrails
Connect work areas and inspection points. Route, width and support points defined according to the project.
View equipment→No equipment found. Try another search.
Need to integrate equipment into your line?
Talk to our team to assess your requirements.